View HT104DF7-1618_9077582.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

b95 3.96 mm pitch miniature connectors for internal power supplies (ul,c-ul and t?v listed) df7 series features 1. complete locking function reliable interior lock protects mated connectors from accidental disconnection. 2. increased contact retention of crimped contacts and prevention of incomplete insertion separate contact retainer increases the contact retention, assures and visually confirms the complete contact insertion. 3. molded-in contact retention tabs handling of terminated contacts during the assembly and termination is easier and avoids entangling of wires, since there are no protruding metal tabs. 4. incorrect insertion prevention connectors are polarized to assure correct mating with corresponding parts. 5.solder crack prevention glass reinforced resin is used in the pin header bodies to prevent solder cracks caused by the heat shrinkage. 6. prevention of incorrect board placement built-in locating posts assure correct connector placement and orientation on the board.(2-12 pos.) 7. supports sealing after installation. sealing compound can be applied to the board installed connector for distance of 6 mm max. from the mounting surface (9 mm max. for single position). 8.cost effective tooling the same crimping tools are used to terminate socket and pin contacts. 9. prevention of short circuits between adjacent contacts each contact is completely surrounded by the insulator housing, electrically isolating it from adjacent contacts. completely enclosed locking system complete locking function board eyelet mounting one pos. type can also be mounted to boards that have eyelets. continued. guide post prevention of incorrect connections full barrier between adjacent contacts. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b96 ordering information df7 - ** series name: df7, df7a number of contacts: 1 to 12 connector type s: socket ds: double-row socket p: header dp: double-row header ep: in-line plug rs/p: retainer contact pitch: 3.96mm(7.92 mm) type of housing: header c: crimp housing dsa: straight header ds: right-angle header blank: retainer 1 2 3 4 5 applicable conductor 1618: awg 16 to awg 18 2022: awg 20 to awg 22 2426: awg 24 to awg 26 packaging scf: socket contacts / reel sc: socket contacts / bag pcf: plug contacts / reel pc: plug contacts / bag 6 7 1 6 scf 7 df7 - * s- 3.96 c 1 2 3 4 5 10. 10 a maximum current connector can carry current of 10 a per contact with #16 awg conductor.refer to page 3 for current ratings for multi-position connectors using other conductor sizes. 11. color variations 1 pos. is available in a standard 3 colors: natural, blue, and red. 12. supports eyelets 1 pos. can be mounted to boards which have eyelets attached. applications office equipment, power supplies for industrial, medical and instrumentation applications, variety of consumer electronic and electrical applications. crimp sockets header refer to page 4 for details. single row, straight type single row, right angle type refer to page 5 for details. refer to page 10 for details. double rows, straight type double row, right angle type refer to page 10 for details. in-line plug panel lock type shown with terminated and installed contacts. refer to page 7 for details. shown with terminated and installed contacts. refer to page 6 for details. retainer (optional, order separately) refer to page 10 for details. single row double rows shown with terminated and installed contacts. refer to page 8 for details. shown with terminated and installed contacts. refer to page 11 for details. socket, header contacts the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b97 materials product sockets headers in-line plug retainer crimp contacts part insulator insulator contact insulator insulator contacts material polyamide polyamide (glass reinforced) high conductivity copper alloy polyamide polyamide high conductivity copper alloy finish color: white color: beige (single row) color: grey (double row) tin plating (note) color: white color: black tin plating (note) remarks ul94v-0 ul94v-0 - - - - - - - - - - - - - - - - ul94v-0 ul94v-0 - - - - - - - - - - - - - - - - product specifications ratings current rating row no. of contacts awg16 awg18 awg20 awg22 1 1~10 10a 7a 5a 4a 4 10a 9a 7a 6a 6 9a8a6a5a 2 8 9a 8a 6a 5a 10 8a 7a 5a 4a 12 8a 7a 5a 4a operating temperature range operating humidity range storage temperature range storage humidity range -10?to 60? (note 2) 40% to 70% (note 2) -35? to 85? (note 1) 20% to 80% voltage rating specificatoin ul/c-ul tv ac 630v ac 600v ac 600v(7.92mm pitch) ac 300v (3.96mm pitch) ul/c-ul/tv ul c-ul tv file no.and recognition no :e52653 :e52653 :r9750437 10 m ohms max. 20mv max., 1ma 500 v dc 1500 v ac for 1 minute measured with a steel pin of 0.64 x 1.2 0.002 mm contact resistance of 20 m ohms max. frequency 10 to 55 hz, single amplitude of 0.75 mm, 3 axis, 2 hours acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis. temperature 40 ? 2 ? , 90% to 95% rh, 96 hours (-55 ? : 30 minutes 5 to 35 ? : 5 minutes 85 ? : 30 minutes 5 to 35 ? : 5 minutes) for 5 cycles flow solder temperature 250 ? , 10 seconds manual soldering: soldering iron temperature 300 ? , 3 seconds contact resistance(initial value) 1000 m ohms min. no flashover or insulator breakdown 0.3n min., 4.5n max. 30 cycles no momentary disconnections of 1 s min. no electrical discontinuity of 1 s. min. contact resistance 20 m ohms max. contact resistance of 20 m ohms max. no deformation of the insulator parts affecting performance 1 1. contact resistance 1 2. insulator resistance 1 3. withstanding voltage 1 4. insertion-extraction force (per contact) 1 5. durability (mating/unmating) 1 6. vibration 1 7. shock 1 8. humidity 1 9. temperature cycle 10. resistance to soldering heat item specification condition note 1: includes temperature rise caused by the current flow. note 2: the term ?torage?refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. note: hirose electric's plating incorporates anti-whisking compounds. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b98 straight header b pcb mounting pattern (board thickness: 1.6 0.1) cavity no. b df7 3.45 2.49 ?1.4 1.7 12.9 3.5 7 m 0.64 a b p=3.96 5.5 4.55 7.1 2.8 (note2) (note1) 10 no. of contacts indicator (note3) 6l09 production lot no. p=3.960.05(7.920.05) 3.450.05 2.490.05 b0.1 ?1.1 +0.1 0 ?1.6 +0.1 0 0.64 7.8 6 6.44 9.9 12.2 3.5 3.2 0.84 cavity no. 1 a 9e26 7.8 6 4.55 production lot no. 9e26 board ?3.9 max ?5 max 0.80.1 5.4 +0.1 _0.3 80.1 3.60.1 eyelet soldering side note 5: one pos. type can also be mounted to boards that have installed eyelets. ?1.6 +0.15 _0.25 mm without eyelet for eyelet 1.4 +0.1 _ 0 nkw ukkntkw nkw ukkntkw 1 pos. 2 to 10 pos. cl no. cl680-0133-1 cl680-0036-5 cl680-0037-8 cl680-0038-0 cl680-0039-3 cl680-0040-2 cl680-0041-5 cl680-0042-8 cl680-0043-0 cl680-0044-3 cl680-0108-4 cl680-0109-7 cl680-0110-6 cl680-0111-9 df7- 1p-3.96dsa df7- 2p-3.96dsa df7- 3p-3.96dsa df7- 4p-3.96dsa df7- 5p-3.96dsa df7- 6p-3.96dsa df7- 7p-3.96dsa df7- 8p-3.96dsa df7- 9p-3.96dsa df7-10p-3.96dsa df7- 2p-7.92dsa df7- 3p-7.92dsa df7- 4p-7.92dsa df7- 5p-7.92dsa 1 2 3 4 5 6 7 8 9 10 2 3 4 5 ------------- 10.40 14.36 18.32 22.28 26.24 30.20 34.16 38.12 42.08 14.36 22.28 30.20 38.12 ------------- 3.96 7.92 11.88 15.84 19.80 23.76 27.72 31.68 35.64 7.92 15.84 23.76 31.68 part number number of contacts a b note 1) bag packaging (100 pieces/bag). order by number of bags. note 2) the 2 pos. type does not have walls on both sides. note 3) df7-2p-7.92dsa plug has #2 contact positions of df7-3p-3.96dsa without contacts inserted and the number of pos. indication is 2 . (mating receptacle: df7#-3s-3-96c) df7-3p-7.92dsa plug has #2 and #4 contact positions of df7-5p-3.96dsa without contacts inserted and the number of pos. indicati on is 3. (mating receptacle: df7#-5s-3-96c) df7-4p-7.92dsa plug has #2, #4 and #6 contact of df7-7p-3.96dsa without contacts inserted and the number of pos. indication is 4. (mating receptacle: df7#-7s-3-96c) df7-5p-7.92dsa plug has #2, #4, #6 and #8 contact positions of df7-9p-3.96dsa without contacts inserted and the number of pos. indication is 5. (mating receptacle: df7#-9s-3-96c) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b99 note 1) tray packaging. order by number of quantity in the tray. note 2) df7-2p-7.92ds plug has #2 contact positions of df7-3p-3.96ds without contacts inserted and the number of pos. indication is 2. (mating receptacle: df7#-3s-3-96c) df7-3p-7.92ds plug has #2 and #4 contact positions of df7-5p-3.96ds without contacts inserted and the number of pos. indication is 3. (mating receptacle: df7#-5s-3-96c) df7-4p-7.92ds plug has #2, #4 and #6 contact of df7-7p-3.96ds without contacts inserted and the number of pos. indication is 4. (mating receptacle: df7#-7s-3-96c) df7-5p-7.92ds plug has #2, #4, #6 and #8 contact positions of df7-9p-3.96ds without contacts inserted and the number of pos. in dication is 5. (mating receptacle: df7#-9s-3-96c) right angle header b pcb mounting pattern (board thickness: 1.6 0.1) a 7.7 2.8 7 7 18 p=3.96 m0.64 7.8 13.5 1.1 b 1.1 9.5 1.4 3.5 production lot no. cavity no. no. of contacts indicator (note2) c ?1.4 2.2 6l09 10 a 10 a (note1) c0.05 7.80.05 2_?1.6 +0.1 0 *_?1.1 +0.1 0 a0.1 p=3.960.05(7.920.05) cl no. cl680-0081-0-24 cl680-0082-2-24 cl680-0083-5-24 cl680-0084-8-24 cl680-0085-0-24 cl680-0086-3-24 cl680-0087-6-24 cl680-0088-9-24 cl680-0089-1-24 cl680-0124-0-24 cl680-0125-3-24 cl680-0126-6-24 cl680-0127-9-24 df7- 2p-3.96ds(24) df7- 3p-3.96ds(24) df7- 4p-3.96ds(24) df7- 5p-3.96ds(24) df7- 6p-3.96ds(24) df7- 7p-3.96ds(24) df7- 8p-3.96ds(24) df7- 9p-3.96ds(24) df7-10p-3.96ds(24) df7- 2p-7.92ds(24) df7- 3p-7.92ds(24) df7- 4p-7.92ds(24) df7- 5p-7.92ds(24) 2 3 4 5 6 7 8 9 10 2 3 4 5 3.96 7.92 11.88 15.84 19.80 23.76 27.72 31.68 35.64 7.92 15.84 23.76 31.68 10.40 14.36 18.32 22.28 26.24 30.20 34.16 38.12 42.08 14.36 22.28 30.20 38.12 8.40 12.36 16.32 20.28 24.24 28.20 32.16 36.12 40.08 12.36 20.28 28.20 36.12 114 84 66 60 48 42 36 36 30 84 60 42 36 part number number of contacts a b c quantity per tray the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b100 in-line plug (panel lock type) b panel cutout 2.0 1.6 1.2 0.8 x 1.44 0.96 0.48 0 y 0.88 0.96 1.44 1.92 100.2 (c-y) +0.1 0 (a+0.4) +0.1 0 3.50.1 3.4 +0.1 0 7.4 +0.1 0 10.2 +0.1 0 3.50.1 (11.32+x) +0.1 0 6.84 +0.1 0 10.2 +0.1 0 3.4 +0.1 0 shown with terminated and installed contacts. 2 to 10 pos. shown with terminated and installed contacts. note1: bag packaging (100 pieces/bag). order by number of bags. note2: refer to page 10 for retainer. cl no. cl680-0134-4 cl680-0018-3 cl680-0019-6 cl680-0020-5 cl680-0021-8 cl680-0022-0 cl680-0023-3 cl680-0024-6 cl680-0025-9 cl680-0026-1 df7- 1ep-3.96c df7- 2ep-3.96c df7- 3ep-3.96c df7- 4ep-3.96c df7- 5ep-3.96c df7- 6ep-3.96c df7- 7ep-3.96c df7- 8ep-3.96c df7- 9ep-3.96c df7-10ep-3.96c 2 1 3 13.96 17.40 21.36 25.32 29.28 33.24 37.20 41.16 45.12 49.08 part number number of contacts a c 4 5 6 7 8 9 10 6.44 10.40 14.36 18.32 22.28 26.24 30.20 34.16 38.12 42.08 b ------------- 3.96 7.92 11.88 15.84 19.80 23.76 27.72 31.68 35.64 6.44 12.44 13.6 25.6 9.9 13.96 no. of contacts indicator cavity no. 1 a a 1 6.44 12.44 13.6 25.6 9.9 contact no.1 indicator no. of contacts indicator cavity no. a 3 3 b p=3.96 7.1 27 12.75 c 9.9 9.5 b 10 1 pos. 2 to 10 pos. 1 pos. 2 to 10 pos. 1 pos. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b101 cl680-0135-7 cl680-0072-9 cl680-0073-1 cl680-0074-4 cl680-0075-7 cl680-0076-0 cl680-0077-2 cl680-0078-5 cl680-0079-8 cl680-0080-7 df7a- 1ep-3.96c df7a- 2ep-3.96c df7a- 3ep-3.96c df7a- 4ep-3.96c df7a- 5ep-3.96c df7a- 6ep-3.96c df7a- 7ep-3.96c df7a- 8ep-3.96c df7a- 9ep-3.96c df7a-10ep-3.96c 6.44 10.40 14.36 18.32 22.28 26.24 30.20 34.16 38.12 42.08 ------------- 3.96 7.92 11.88 15.84 19.80 23.76 27.72 31.68 35.64 in-line plug cl no. 1 2 3 4 5 6 7 8 9 10 part number number of contacts a b note1: bag packaging (100 pieces/bag). order by number of bags. note2: refer to page 10 for retainer. 25.6 9.9 no. of contacts indicator 6.44 a1 cavity no. 1 a contact no.1 indicator a cavity no. (note2) no. of contacts indicator b p=3.96 7.1 27 9.9 9.5 b 10 1 pos. 2 to 10 pos. shown with terminated and installed contacts. shown with terminated and installed contacts. 1 pos. 2 to 10 pos. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b102 cl680-0132-9 cl680-0009-2 cl680-0010-1 cl680-0011-4 cl680-0012-7 cl680-0013-0 cl680-0014-2 cl680-0015-5 cl680-0016-8 cl680-0017-0 df7- 1s-3.96c df7- 2s-3.96c df7- 3s-3.96c df7- 4s-3.96c df7- 5s-3.96c df7- 6s-3.96c df7- 7s-3.96c df7- 8s-3.96c df7- 9s-3.96c df7-10s-3.96c 5.50 10.00 13.96 17.92 21.88 25.84 29.80 33.76 37.72 41.68 ------------- 3.96 7.92 11.88 15.84 19.80 23.76 27.72 31.68 35.64 cl no. 1 2 3 4 5 6 7 8 9 10 part number number of contacts a b note1: bag packaging (100 pieces/bag). order by number of bags. note2: refer to page 10 for retainer. crimp sockets 5.5 5.9 no. of contacts indicator 9 15.5 1 a 5.5 5.9 cavity no. contact no.1 indicator cavity no. a 1 no. of contacts indicator (note 3) 6 5 4 3 2 178910 b 10 b p=3.96 5.9 10 17 1 pos. 2 to 10 pos. shown with terminated and installed contacts. shown with terminated and installed contacts. 1 pos. 2 to 10 pos. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b103 retainer 8.8 no. of contacts indicator 2.45 b 1 10.3 cavity no. 6.6 2.2 cavity no. no. of contacts indicator a 3 p=3.96 2.2 10.8 6.5 9.3 2.75 b 10 b 1 pos. 2 to 10 pos. 1 pos. 2 to 10 pos. cl680-0136-0 cl680-0027-4 cl680-0028-7 cl680-0029-0 cl680-0030-9 cl680-0031-1 cl680-0032-4 cl680-0033-7 cl680-0034-0 cl680-0035-2 df7- 1rs/p-3.96 df7- 2rs/p-3.96 df7- 3rs/p-3.96 df7- 4rs/p-3.96 df7- 5rs/p-3.96 df7- 6rs/p-3.96 df7- 7rs/p-3.96 df7- 8rs/p-3.96 df7- 9rs/p-3.96 df7-10rs/p-3.96 ------------- 10.00 13.96 17.92 21.88 25.84 29.80 33.76 37.72 41.68 ------------- 3.96 7.92 11.88 15.84 19.80 23.76 27.72 31.68 35.64 cl no. 1 2 3 4 5 6 7 8 9 10 part number number of contacts a b note1: bag packaging (100 pieces/bag). order by number of bags. note2: retainer is common to sockets, in-line plug. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b104 cl no. part number number of contacts a b quantity per tray df7- 4dp-3.96dsa(24) df7- 6dp-3.96dsa(24) df7- 8dp-3.96dsa(24) df7-10dp-3.96dsa(24) df7-12dp-3.96dsa(24) 4 6 8 10 12 10.40 14.36 18.32 22.28 26.24 3.96 7.92 11.88 15.84 19.80 132 96 72 60 54 cl680-0145-0-24 cl680-0146-3-24 cl680-0147-6-24 cl680-0148-9-24 cl680-0149-1-24 double-row straight header 3.3 4.55 2.22 1.4 1.7 1.26 6.6 contact no.1 indicator no. of contacts indicator cavity no. 3.5 m 0.64 p=3.96 b 13.7 a 12.9 2.8 10 a p=3.960.05 b0.1 6.60.05 *- ?1.1 +0.1 0 contact no.1 2.220.05 3.30.05 ?1.6 +0.1 0 note: tray packaging. order by number of trays quantity. b pcb mounting pattern (board thickness: 1.6 0.1) cl no. part number number of contacts a b c quantity per tray df7- 4dp-3.96ds(24) df7- 6dp-3.96ds(24) df7- 8dp-3.96ds(24) df7-10dp-3.96ds(24) df7-12dp-3.96ds(24) 4 6 8 10 12 10.40 14.36 18.32 22.28 26.24 8.40 12.36 16.32 20.28 24.24 3.96 7.92 11.88 15.84 19.80 88 64 48 40 36 cl680-0150-0-24 cl680-0151-3-24 cl680-0152-6-24 cl680-0153-9-24 cl680-0154-1-24 double-row right angle header 12.4 cavity no. a a no. of contacts indicator 2.2 ?1.8 6.6 c p=3.96 b 14.3 17.1 21 a contact no.1 indicator 7.8 3.96 m 0.64 3.5 c0.1 3.960.05 b0.1 *-?1.1 +0.1 0 2-?2 +0.1 0 7.80.05 3.960.05 contact no.1 note: tray packaging. order by number of trays quantity. b pcb mounting pattern (board thickness: 1.6 0.1) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b105 note: bag packaging (100 pieces/bag). order by number of bags. cl no. part number number of contacts a b df7-4ds-3.96c df7-6ds-3.96c df7-8ds-3.96c df7-10ds-3.96c df7-12ds-3.96c 4 6 8 10 12 10.00 13.96 17.92 21.88 25.84 3.96 7.92 11.88 15.84 19.80 reserved for product expansion standard lock cl no. part number number of contacts a b df7a-4ds-3.96c df7a-6ds-3.96c df7a-8ds-3.96c df7a-10ds-3.96c df7a-12ds-3.96c 4 6 8 10 12 10.00 13.96 17.92 21.88 25.84 3.96 7.92 11.88 15.84 19.80 cl680-0160-4 cl680-0161-7 cl680-0162-0 cl680-0163-2 cl680-0164-5 enhanced ergonomic lock double-row socket 6.6 no. of contacts indicator cavity no. p=3.96 b contact no.1 a 12.5 15.2 10 17 (16) (17.2) a 1 9 2 10 standard lock enhanced ergonomic lock the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b106 applicable cable (tin plated annealed copper wire) tools cl680-0001-0 cl680-0002-3 cl680-0003-6 cl680-0004-9 cl680-0005-1 cl680-0006-4 cl680-0007-7 cl680-0008-0 df7-1618scf df7-1618sc df7-2022scf df7-2022sc df7-1618pcf df7-1618pc df7-2022pcf df7-2022pc 3,000 100 3,000 100 3,000 100 3,000 100 tin plating cl no. reel bag reel bag reel bag reel bag part number packaging quantity finish awg#16(26/0.254mm) awg#18(34/0.18mm) awg#20(21/0.18mm) awg#22(17/0.16mm) awg#16(26/0.254mm) awg#18(34/0.18mm) awg#20(21/0.18mm) awg#22(17/0.16mm) ul1007 ul1015 wire size(stranded wire conductor) 2.1 to 2.5mm 1.6 to 1.9mm 2.9 to 3.2mm 2.4 to 2.7mm ul style jacket diameter note 1: applicable wire with tin plated solid soft conductor. note 2: when using other than the recommended wire, contact your nearest hirose representative. note 3: strip length: 3.0 to 3.8mm. manual automatic cl901-0005-4 cl901-4554-4 cl901-4553-1 cl550-0268-0 cl550-0269-3 cm-105 ap105-df7-1618 ap105-df7-2022 ht104/df7-1618 ht104/df7-2022 type press unit crimp tools applicator - - - - - - - - - - - - - - - - df7-1618scf/df7-1618pcf df7-2022scf/df7-2022pcf df7-1618sc/df7-1618pc df7-2022sc/df7-2022pc cl no. part number applicable contacts crimp contact ?2 2 2.4 12.6 0.8 2 p=11 t=0.25 2.35 2.3 1.6 awg no. 16 18 2.5 2.52 0.85 1.3 21.7 2 2 p=11 0.64 2.3 1.6 t=0.25 ?2 awg no. 0.8 16 18 female contact male contact the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b107 b mating dimensions socket to straight header connection socket to straight header connection (double-row) a c b df7_ *p_3.96dsa df7_ *s_3.96c df7_ *rs/p_3.96 20 df7_ *ds_3.96dsa(24) df7_ *ds_3.96c (16.5) 20 df7_ *dp_3.96dsa(24) df7a_ *ds_3.96c (17.7) socket to right angle header connection (double-row) (28.1) df7_ *ds_3.96c df7_ *dp_3.96ds(24) (17.1) (28.1) df7a_ *ds_3.96c df7_ *dp_3.96ds(24) (18.3) socket to right angle header connection df7_ *rs/p_3.96 df7_ *s_3.96c df7_ *p_3.96ds 25.1 26.6 1 pos. df7-*s-3.96c 18.5 20.0 0 8.5 21.5 0 9.0 20.3 2 to 12 pos. a b c the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b108 socket to in-line plug (panel mount type) connection socket to in-line plug connection df7_ *ep_3.96c df7_ *s_3.96c df7_ *rs/p_3.96 e d df7a_ *ep_3.96c df7_ *s_3.96c df7_ *rs/p_3.96 g f 1 pos. 35.1 37.0 34.0 32.1 2 to 12 pos. d e 1 pos. 35.1 37.0 34.0 32.1 2 to 12 pos. f g the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b109 b contact extraction procedure contact extraction tool: flat-bladed screwdriver, 1.4 mm blade width use with crimp contacts: df7-1618sc(f), df7-2022sc(f), df7-1618pc(f), df7-2022pc(f) work method flat-bladed screwdriver molded-in lance pull-out direction 1. refer to the drawing no. 1. insert correct size screwdriver in the insulator against the molded-in lance. deflect the lance as shown. 2. assure that the lance is deflected to release the contact and pull- out wire with the terminated contact. b general use precautions make sure that the lock is fully depressed before un-mating the connectors. use correct size of the wires. do not forcefully twist or deform wires, as this may affect the crimped contact connection. when the potting process is to be performed, please take into consideration the surface tension of the resin when filling. housing cross-section the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.

▲Up To Search▲

Price & Availability of HT104DF7-1618

	To Download HT104DF7-1618 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .